AMQ Uptake Single Door Laminate Storage Locker

AMQ's new Uptake Lockers Provide create a secure and organized space for hybrid workers and guests to stash and store their personal belongings. These great looking storage options make a clean and clutter-free office possible by allowing staff and guests to hide away belongings. They also function as touch down areas for employees who don't have permanent workspaces, offering a sense of belonging and grounding. Please contact us if you'd like sizes not listed here or to customize your locker setup.

*Please note that individual single- or double-wide lockers cannot stand alone. If not secured to the building structure, the minimum locker numbers that need to be ganged depend on depth, height, and width, and are shown in the table below. If locker widths vary in the application, rules for the narrowest width applies. A double-wide locker counts as two lockers.

These items can only be shipped to a commercial address, no residential delivery, apologies.

• Multiple widths, depths and heights (contact us if you need a size not listed here)
• 13 Laminate choices with option to contrast door finish
• 2 ledge pull finishes
• Ledge pull, if keyed lock selected Polished Chrome
• Fixed shelf on one-door units 54"H and taller
• Two coat hooks on 18"D lockers
• One coat rod on 24"D lockers
• 1 1/4" adjustable leveling glides
• Ganging hardware
• Door on locker can be hinged on the left or right (see below)
• Standard lock, master lock or Digilock Versa Keypad 
• Lifetime Factory Warranty with Approved Labor

Low Pressure Laminate Top Finishes 

Pull Finishes: Black or Platinum Metallic

Optional Digilock Versa: Locks are surface mounted on the door and come set to a shared use mode. The user locks with their credential and unlocks with the same credential. Once unlocked, the lock is reset for another user. Digilock Versa keypad locks are powered by two lithium 2450 batteries.

Enable facility managers to modify lock programming with an unique programming key and override locks using manager keys. Programming and manager keys are required if keyless lock option is selected. The programming key is used during installation to pair the manager key to the lock. The manager key is used to override the lock when a credential is lost or forgotten or the battery loses power. Additional manager keys can be paired at any time. One manager key may be paired to infinite locks; however, each lock may only pair with up to six manager keys.

Orientation: Door on locker can be hinged on the left or right. Pull and lock are located on the opposite side of the hinge.

*Individual single- or double-wide lockers cannot stand alone. If not secured to the building structure, the minimum locker numbers that need to be ganged depend on depth, height, and width, and are shown in the table below. If locker widths vary in the application, rules for the narrowest width applies. A double-wide locker counts as two lockers. Contact us if you need assistance.